Power Cables

10A C14 to C13 (Desktop) Power Cable (0.75mm² , 1.8m)

Cost-effective 10A IEC C14 to C13 power extension cable built with high-tensile copper-clad steel (CCS) conductors for reliable desktop PC and monitor connections.

Product Images & Video

Cable view

Key Features

Universal IEC C14 to C13 Interconnect

Connects desktop PCs, display monitors, low-draw UPS backup units, and IT peripherals equipped with standard IEC 60320 power inlets.

High-Tensile CCS Conductor Cores

Built with Copper-Clad Steel (CCS) conductors (3G 0.75mm²), providing increased physical tensile strength and resistance to wire breakage during tight routing.

Cost-Effective Power Extension

Delivers an economical jumper cabling solution for basic office setups and light-duty workstation power routing without premium copper overhead.

Fully Molded Strain Relief

Equipped with heavy-duty PVC molded connectors at both the C14 male plug and C13 female socket to prevent cable fatigue and loose connection points.

Protective 6.5mm PVC Outer Jacket

Encased in a durable 6.5mm OD black PVC outer sheath designed to protect internal conductors from abrasion, bending stress, and everyday wear.

Standard 1.8m Length

Provides an optimal 1.8m (6ft) reach for clean, organized cable management between desktop towers, monitors, and secondary power outlets.

Technical Specifications

Specification	Details
Product Type	IEC Power Extension Cable / Jumper Cord
Connector A	IEC 60320 C14 Male Plug
Connector B	IEC 60320 C13 Female Connector
Conductor Material	Copper-Clad Steel (CCS)
Conductor Wire Gauge	3G 0.75mm²
Cable Outer Diameter (OD)	6.5mm
Cable Length	1.8m (6ft)
Voltage / Current Rating	10A/250V AC
Jacket Material	Flame-retardant PVC (Black)
Connector Type	Fully molded with integrated strain relief

Applications

Desktop Workstations & Displays Provides primary power connectivity between desktop PC power supply units (PSUs), LED/LCD monitors, and wall outlets or extension boards.
Low-Draw IT Peripherals Ideal for powering desktop office equipment such as label printers, secondary displays, desktop scanners, and small audio receivers.
Workstation Cable Extension Extends the reach of existing C13 power cables for flexible workstation positioning in offices, home workspaces, and reception desks.
Light-Duty Rack Equipment Serves as a budget-friendly power link for low-power IT hardware, basic network switches, and accessory equipment inside server enclosures.
Test Bench & Maintenance Setup Useful as a durable, high-tensile jumper lead on technical workbench stations for temporary hardware testing and staging.

Package Contents

1x 10A C14 to C13 (Desktop) Power Cable (0.75mm² , 1.8m).

Safety & Compliance

Important Safety Instructions:

Do Not Exceed Current Limits: Ensure connected devices do not exceed the 10A/250V maximum load rating (2500W) to prevent conductor overheating.
Intended for Light to Moderate Loads: Due to the high electrical resistance of Copper-Clad Steel (CCS) relative to pure copper, avoid using this cable for heavy, continuous high-draw equipment such as high-wattage cryptocurrency miners or high-density server power supplies.
Indoor Dry Location Use Only: Keep the power cable away from water, high moisture, and outdoor environments to prevent short circuits or electrical shock hazards.
Inspect Outer Insulation Regularly: Periodically check the 6.5mm PVC jacket and molded ends for cuts, exposed wiring, or thermal deformation. Discard immediately if damaged.
Avoid Excessive Kinking or Bending: Do not tightly bind or sharply bend the cable, as CCS conductors are stiffer than pure copper and subject to metal fatigue under repeated severe flexing.
Ensure Firm Connector Engagement: Insert both the C14 plug and C13 connector fully into their respective sockets to maintain a snug connection and prevent arcing.